29.6.09

Why is AC used rather than DC to supply electricity

Attention Mr G.

I hope you are regularly visiting the Physics blog. Here is some stuff that may help you answer your BIG question.

Stolen for Wikipedia
"Centralized power generation became possible when it was recognized that alternating current electric power lines can transport electricity at low costs across great distances by taking advantage of the ability to change voltage across the distribution path using power transformers. The voltage is raised at the point of generation (a representative number is a generator voltage in the low kilovolt range) to a much higher voltage (tens of thousands to several hundred thousand volts) for primary transmission, followed by several downward transformations, to as low as that used in residential domestic use, such as, e.g., 120 / 240 VAC at 60 Hertz in North America and 230 / 400 VAC at 50 Hertz in Europe."

Transmission loss

The advantage of AC for distributing power over a distance is due to the ease of changing voltages with a transformer. Power is the product current × voltage (P = IV). For a given amount of power, a low voltage requires a higher current and a higher voltage requires a lower current. Since metal conducting wires have a certain resistance, some power will be wasted as heat in the wires. This power loss is given by P = I²R. Thus, if the overall transmitted power is the same, and given the constraints of practical conductor sizes, low-voltage, high-current transmissions will suffer a much greater power loss than high-voltage, low-current ones. This holds whether DC or AC is used.

Transforming DC power from one voltage to another was difficult and expensive due to the need for a large spinning rotary converter or motor-generator set, whereas with AC the voltage changes can be done with simple and efficient transformer coils that have no moving parts and require no maintenance. This was the key to the success of the AC system. Modern transmission grids regularly use AC voltages up to 765,000 volts. [10]

Alternating current transmission lines do have other losses not observed with direct current. Due to the skin effect, a conductor will have a higher resistance to alternating current than to direct current; the effect is measurable and of practical significance for large conductors carrying on the order of thousands of amperes. The increased resistance due to the skin effect can be offset by changing the shape of conductors from a solid core to a braid of many small wires.


Links:

War_of_Currents

Alternating_current

Electric_power_transmission



No comments: